Fiberopticvideos.com
Welcome
Login / Register

Access Network Interconnection Solution: Fiber Optic Connector

Fiber optic connectors are ubiquitous in today's optical network. It is said that about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. For instance, fiber optic connectors, such as SC, LC, MPO, and MU etc. are widely used in access network which meet the demands of network interconnection. Fiberstore offers you a comprehensive solution with the high-quality fiber optic connector products which may satisfy your access network interconnections.

Click the diagram to view larger version
 
 
 
 
 
 

 

Instruction of the Diagram

No. Point of Use Fiber Configuration Optical Connector
1 Inside Panel / Inside Module Fiber SC/LC/MU
2 Inside Frame Cord SC/LC/MU/MPO
3 Between Frames / Indoor / Leading-in Cable SC/Quick-SC
4 Indoor Indoor Optical Cable SC

 

Related Products

Fiberstore LC CONNECTOR
              LC Connector
Fiberstore SC&Q-SC CONNECTOR
 SC Connector & Quick-SC Connector
Fiberstore MU CONNECTOR
                    MU Connector

                   Fiberstore MPO CONNECTOR

                  MPO Connector

 

Ferrule Polishing Options

Polishing Type Connection Feature Connector
PC
(Physical Contact)
PC Ferrule and faces are polished sphercally so as to ensure fiber-to-fiber contact. This polishing type of ferrule guarantees a return loss of 25dB. SC, FC, LC and MU etc. attached to multi-mode fiber or single-mode fiber
UPC
(Ultra Physical Contact)
UPC An evolution of PC polishing, this method achieves a return loss of 40dB. It is possible to connect with a PC-polished connector. In that case, however, performance is guaranteed according to the level of PC polishing achieved. SC, FC, LC and MU etc. attached to multi-mode fiber or single-mode fiber
APC
(Angled Physical Contact)
APC APC is polished on an 8° angle. When compared with a normal PC connector, an APC connector exhibits better reflectance properties, because the angled polish reduces the amount of light reflected at the connector interface. SC, ST, FC, LC and MU etc. only attached to single-mode fiber

 


Post your comment

Comments

Be the first to comment

Related Articles

RSS