Routers and Switches - RSS Feed

Recovering The Root Password In Junos OS

Mon, 31 Jul 2017 20:32:49 +0000

How to configure, recover, or reset the root password on a Juniper Networks device running the Junos operating system software.

The written form of this video can be read at http://www.juniper.net/documentation/en_US/junos/topics/task/configuration/authentication-root-password-recovering.html

Juniper Learning Byte: NonStop Bridging

Mon, 31 Jul 2017 20:32:49 +0000

Juniper Learning Bytes are short and concise tips and instructions on specific features and functions of Juniper technologies. This Learning Byte explains the implementation of nonstop bridging on Juniper Networks EX Series Ethernet Switches and provides a demonstration of its functionality.
More Learning Bytes at: www.juniper.net/learningbytes.

J-Web Learning Byte

Mon, 31 Jul 2017 20:32:49 +0000

The Junos J-Web Learning Byte covers basic configuration and administration of the J-Web feature in the Junos OS.

This Learning Byte is most appropriate for users who desire to administer JUNOS devices using a web interface.
Relevant to Junos OS Releases: All Junos releases
Relevant to Juniper Platforms: MX Series, SRX Series, J Series, EX Series, M Series
Topics/Keywords: J-Web, Administrator Interface, JUNOS GUI

Link Aggregation Group Overview Learning Byte

Mon, 31 Jul 2017 20:32:49 +0000

This Learning Byte will provide an overview of configuring aggregated Ethernet interfaces. The configuration of aggregated Ethernet interfaces enables multiple Ethernet interfaces to be grouped together and form a single link layer interface also know as a link aggregation group (LAG). A step-by-step demo will illustrate the configuration of a LAG on an EX Series switch.

This Learning Byte is most appropriate for users unfamiliar with LAG configuration using the Junos OS.

Presenter: Jerry Ratka, Course Developer
Relevant to Junos OS Releases: All currently available Junos OS releases
Relevant to Juniper Platforms: J Series, SRX Series, EX Series, M Series, T Series, and MX Series

Juniper EX4200 Trial - Worms And Bugs

Mon, 31 Jul 2017 20:32:49 +0000

Juniper Networks EX Series Trial video

Configuring LAG And LACP On Juniper EX Switches YouTube

Mon, 31 Jul 2017 20:32:49 +0000

Configuring LAG And LACP On Juniper EX Switches YouTube

QoS: Juniper EX4300 Classifier Tutorial

Mon, 31 Jul 2017 20:32:49 +0000

This tutorial shares the information about the Classifier configuration of Juniper's EX4300 platform.

EX4300 Product info:
http://www.juniper.net/us/en/products-services/switching/ex-series/ex4300/

Juniper EX2200 Switch (Unboxing)

Mon, 31 Jul 2017 20:32:49 +0000

Juniper EX2200 Switch (Unboxing)
24 port Gig switch

Check me out on Twitter @avidos2099

L3vlan

Mon, 31 Jul 2017 20:32:49 +0000

Configuring routed VLAN interfaces (RVI) on the Juniper Networks EX-series

Configuring LAG And LACP On Juniper EX Switches

Mon, 31 Jul 2017 20:32:49 +0000

Configuring LAG And LACP On Juniper EX Switches

Returning A Virtual Chassis To Standalone Mode

Mon, 31 Jul 2017 20:32:49 +0000

The Returning a Virtual Chassis to Standalone Mode Learning Byte covers how to return switches in a multi-node virtual chassis back to standalone devices. This byte is most appropriate for users who need a basic understanding of disabling a virtual chassis on the EX switching platform.

Presenter: David Williams, Education Services Instructor
Relevant to Junos OS Releases: All Junos releases that support Virtual Chassis
Relevant to Juniper Platforms: EX-Series

Juniper JUNOS Packet Capture And Sniffing

Mon, 31 Jul 2017 20:32:49 +0000

How to capture packets packet with Junos
For more networking Tutorials, Tips and Tricks, Follow me at
switchpacket.blogspot.com
Google plus community: plus.google.com/u/0/communities/105670062781143163573
Twitter: @hamalawy

How To Create A Link Aggregation Group (LAG) On An EX Series Device

Mon, 31 Jul 2017 20:32:48 +0000

This video demonstrates the steps necessary to configure a Link Aggregation Group or LAG on an EX Series device. Through the use of screencaptures and text, this video will show how to create and verify a LAG.

To create a LAG, you will

1. Specify the number of aggregated Ethernet interfaces to be created
2. Specify the minimum number of links
3. Specify the link speed
4. Specify the member interfaces
5. Specify an interface family and interface properties.

To verify that the LAG is up:

Run the CLI command “run show interfaces terse | match ae0”.

For a text version of this video, visit http://kb.juniper.net/KB10927.

For more information, visit the Resolution Guide “Troubleshoot Aggregated Ethernet Interface” at http://kb.juniper.net/KB19798.

The Juniper Networks Support Site can be found at http://www.juniper.net/support.

Configuring Storm Control On Juniper Network EX Series Switches

Mon, 31 Jul 2017 20:32:48 +0000

Configuring Storm Control on Juniper Network EX Series Switches

How To Access A USB Drive In Junos On The EX/J/SRX/MX Series Via Mount And Unmount

Mon, 31 Jul 2017 20:32:48 +0000

How To Access A USB Drive In Junos On The EX/J/SRX/MX Series Via Mount And Unmount

Configuring High Availability On Juniper Virtual Chassis

Mon, 31 Jul 2017 20:32:48 +0000

High Availability features like GRES, Nonstop Routing or Nonstop Bridging can significantly reduce the RE failure detection time and helps to eliminate network outages. This Learning Byte is appropriate for users with a background in the basics of routing and familiar with the concepts of Virtual Chassis, or anyone looking to learn about High Availability features present in Juniper Virtual Chassis.

Presenter: Pawel Jakacki, Technical Instructor, Clico
Relevant to Junos OS Releases: 11.3 and higher
Relevant to Juniper Platforms: EX Series

Juniper Network's EX 4200 Series Network Switch

Mon, 31 Jul 2017 20:32:48 +0000

Michael Peachey, senior product marketing manager at Juniper, walks through the parts of the EX 4200 series network switch.

For full coverage, check out SearchNetworking.com

Topology Independent In-Service Upgrade / Junos OS For QFX5100 And EX4600 Series Switches

Mon, 31 Jul 2017 20:32:48 +0000

The Topology Independent In-Service Upgrade (TISSU) feature allows in-service software upgrades on the QFX5100 and EX4600 Series switches without redundant hardware-based Routing Engines. This Learning Byte is appropriate for users interested in performing a TISSU on their QFX5100 and EX4600 Series switches

Presenter: Jared Gull
Relevant to Juniper Platforms: QFX Series, EX Series

Configuring Storm Control On Juniper EX Switches

Mon, 31 Jul 2017 20:32:48 +0000

Configuring Storm Control On Juniper EX Switches

Mon, 31 Jul 2017 20:32:48 +0000

Configuring storm control on Juniper EX switches